RBT 3D Macro Attachment Maco I
The macro attachment RBT-3D Macro I opens up new dimensions in the stereo-photography. Its easy handling makes the 3D-macro-photography as easy as never before. The macro-attachment is available for each RBT-3D mirror reflex camera (X2, X2II, X3, X4, X5, Y108, Y109, basis 65 mm or 75 mm). The new developed assembly allows the picture taking of statically as well as dynamical motives.
RBT-3D Macro I
The macro attachment is equipped with an excellent lens „Ananet" a (focal length: 105 mm) and will be supplied with lens hood.
The aperture and stereo basis will be appointed by a special developed aperture slide. You can pre-select the stereo basis. (6 or 11 mm). The aperture value (k) is 36.Aperture slides with other stereo bases and aperture values can be delivered by option.
Using the standard lens Meopta Anaret 4,5/105mm the enlargement can be adjusted continuously from 1:1 to 1:3.. The adjustment can be made either on the right or the left side of the macro attachment.
Other enlargements can be reached with the lens Meopta Anaret 4,5/80mm (1,7:1 to 1:1,4) or Componon S 5,6/135mm (1:1,5 to 1:6,5).
The new designed macro attachment allows the use of both viewfinders and therefore the rating of the object in its 3-dimensional effect. By open aperture slide, the bright viewfinder image makes the choice of the motive easier. By closed aperture slide, the depth of field can be examined.
For installation on site the lenses will be removed from the camera and the macro attachment connected with the camera. Finally, the bayonet will be locked.
The camera will be connected, via remote control cable with the macro attachment. The trigger for the camera and the aperture slide is located on the macro attachment. In addition, the macro attachment and the camera can be initiated via remote control release
The power supply of the macro attachment can be made by the camera or by an internal battery (with X4, X5, Y108 and Y109 the power supply must be made by an internal battery).
The picture size is dictated by the camera.
Potential level nonconformities can be corrected very easily at the macro attachment on your own.
Two flash systems are available: 1. flash system with TTL-measuring (X3) or 2. flash system without TTL-measuring. Both systems consist of two flash units.
The macro attachment has a tripod screw connection ( ¼‘‘ inch).